| |
| CAPACITY |
1/2” to 2-1/2 ” N.B. PIPE CAP |
| TYPE |
PILLAR TYPE |
| (MANUAL)SPCN. NO. |
AMT – 1104 |
|
The Machine is used for Cutting
External Thread on Steel Pipe by Chasing method.
HSS Tangential Chasers are used as cutters. Pipe
remains stationery and Die Head rotates. BSP, BSPT,
NPT, UNF, BSW, Acme Threads can be cut on this machine
depending upon the type of Chasers. The machine
mainly consists the following:-
Base, - Head Stock, - Saddle,
- piller Type Clamping Vice, - Die Head. |
|
| SPECIFICATIONS |
| Min. Dia of Pipe
to be Thread |
1/2” N.B. Pipe |
| Max.. Dia of Pipe to be Thread |
2-1/2” |
| Max. Length of thread to
be cut |
200 mm |
| Number/Range of Spindle Speeds |
Two Nos. 34 & 59 RPM |
| Main Motor HP/RPM |
10/960 RPM |
| Approx. Wt. Of the Machine. |
1200 Kgs. |
|
|
